{"title":"Cutting","description":null,"products":[{"product_id":"wm-beamsaw-3800-cnc","title":"WM BeamSaw 3800 CNC Beam Panel Saw","description":"\u003cp\u003eA front-loading CNC beam saw for shops cutting more than about forty sheets a day, where a sliding table saw has become the bottleneck. The pressure beam clamps the full stack before the blade enters, so the bottom sheet cuts as cleanly as the top one, and the 12 ft 6 in cutting length takes full 12 ft boards without a second pass.\u003c\/p\u003e\u003cp\u003eCut patterns come straight off the optimiser, and the programmable rear pusher with six grippers squares and positions the stack automatically. Practically, that means the operator loads, presses cycle start, and unloads finished stacks rather than measuring anything.\u003c\/p\u003e\u003ch4\u003eKey features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePressure beam clamping across the full 12 ft 6 in cutting length\u003c\/li\u003e\n\u003cli\u003e24 HP main saw with 7.5 HP scoring blade for chip-free double-sided laminate\u003c\/li\u003e\n\u003cli\u003eProgrammable rear pusher with six independently clamping grippers\u003c\/li\u003e\n\u003cli\u003eAir-float working tables front and rear for one-person sheet handling\u003c\/li\u003e\n\u003cli\u003eAutomatic blade projection and scoring alignment from the pattern file\u003c\/li\u003e\n\u003cli\u003e21 in touchscreen with pattern optimiser and offcut inventory\u003c\/li\u003e\n\u003cli\u003eBarcode label printing for downstream part tracking\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting length:\u003c\/strong\u003e 12 ft 6 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting height:\u003c\/strong\u003e 4 in at 90 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMain blade:\u003c\/strong\u003e 16 in diameter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScoring blade:\u003c\/strong\u003e 8 in diameter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMain motor:\u003c\/strong\u003e 24 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScoring motor:\u003c\/strong\u003e 7.5 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarriage speed:\u003c\/strong\u003e 328 ft\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePusher speed:\u003c\/strong\u003e 262 ft\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePositioning accuracy:\u003c\/strong\u003e plus or minus 0.004 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFootprint:\u003c\/strong\u003e 283 x 252 x 79 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet weight:\u003c\/strong\u003e 13,000 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSite services required\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectrical:\u003c\/strong\u003e 230 V or 460 V 3-phase 60 Hz. 110 A at 230 V, 55 A at 460 V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressed air:\u003c\/strong\u003e 115 PSI minimum, 18 SCFM clean dry air\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDust extraction:\u003c\/strong\u003e 2 ports, 2,470 CFM total\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloor:\u003c\/strong\u003e Level concrete, 6 in minimum slab\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSupplied with\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eOne main blade and one scoring blade fitted, one spare set\u003c\/li\u003e\n\u003cli\u003eOptimising software licence, single seat\u003c\/li\u003e\n\u003cli\u003eLabel printer and one roll of thermal labels\u003c\/li\u003e\n\u003cli\u003eInstallation, commissioning and operator training available through the manufacturer's authorized service network, quoted separately\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Woodie Machinery","offers":[{"title":"Default Title","offer_id":53398986916123,"sku":"WM-BEAMSAW-3800","price":84600.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/4313\/5771\/files\/wm-beamsaw-3800-cnc-1.png?v=1786980729"},{"product_id":"wm-verticut-4200-panel-saw","title":"WM VertiCut 4200 Vertical Panel Saw","description":"\u003cp\u003eA vertical panel saw for shops where floor space costs more than cycle time. Standing upright against a wall it occupies about 13 sq ft of floor, yet it breaks down full 4 x 8 ft sheets in both directions without the operator ever lifting a board flat onto a table. For a small joinery, a sign shop or a site workshop, it does the job of a machine four times its footprint.\u003c\/p\u003e\u003cp\u003eThe saw head rotates 90 degrees for crosscuts and rips on the same frame, and the scoring pass handles melamine faces without chipping.\u003c\/p\u003e\u003ch4\u003eKey features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eRotating saw head for vertical crosscuts and horizontal rips on one frame\u003c\/li\u003e\n\u003cli\u003eScoring pass function for chip-free melamine and laminate\u003c\/li\u003e\n\u003cli\u003eCounterbalanced head that holds position anywhere on the travel\u003c\/li\u003e\n\u003cli\u003eRoller-mounted panel support with adjustable stops both axes\u003c\/li\u003e\n\u003cli\u003eDigital scale on both axes reading to 1\/32 in\u003c\/li\u003e\n\u003cli\u003eWall-mounted or free-standing frame options\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum panel:\u003c\/strong\u003e 146 x 73 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical cut length:\u003c\/strong\u003e 75 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorizontal cut length:\u003c\/strong\u003e 165 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting depth:\u003c\/strong\u003e 2-3\/8 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade diameter:\u003c\/strong\u003e 10 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 4 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade speed:\u003c\/strong\u003e 4,500 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloor footprint:\u003c\/strong\u003e 181 x 10 in, 78 in high\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet weight:\u003c\/strong\u003e 1,060 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSite services required\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectrical:\u003c\/strong\u003e 230 V 3-phase 60 Hz, 28 A, or 240 V single phase on request\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDust extraction:\u003c\/strong\u003e one 4 in port, 470 CFM minimum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWall:\u003c\/strong\u003e Structural wall required for wall-mounted configuration\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSupplied with\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eOne 10 in combination blade fitted, one spare\u003c\/li\u003e\n\u003cli\u003eDigital scales both axes, two flip stops\u003c\/li\u003e\n\u003cli\u003eWall mounting kit and leveling feet\u003c\/li\u003e\n\u003cli\u003eSelf-install with phone commissioning support\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Woodie Machinery","offers":[{"title":"Default Title","offer_id":53398987145499,"sku":"WM-VERTICUT-4200","price":14300.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/4313\/5771\/files\/wm-verticut-4200-panel-saw-1.png?v=1786980730"},{"product_id":"wm-opticross-650-upcut-saw","title":"WM OptiCross 650 Automatic Up-Cut Crosscut Saw","description":"\u003cp\u003eAn automatic up-cut crosscut saw for docking solid timber to length in volume, and the machine that turns defecting from a marking-and-cutting job into a single operation. The blade rises through the table from below, so the workpiece is supported right up to the cut line and the offcut cannot kick back.\u003c\/p\u003e\u003cp\u003eFed from a roller table with a programmable stop, it will run a cutting list of mixed lengths automatically, advancing the stop between cuts. On a furniture or stair shop docking rail and stile stock all day, it removes almost all of the measuring.\u003c\/p\u003e\u003ch4\u003eKey features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eUp-cut blade action with full workpiece support at the cut line\u003c\/li\u003e\n\u003cli\u003ePneumatic top and side clamping before each cut\u003c\/li\u003e\n\u003cli\u003eProgrammable length stop with 200 position cutting-list memory\u003c\/li\u003e\n\u003cli\u003eBlade fully enclosed below the table between cuts\u003c\/li\u003e\n\u003cli\u003eTwo-hand cycle initiation with light curtain on the operator side\u003c\/li\u003e\n\u003cli\u003eOptional defect-marking crayon reader for automatic optimising\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum cut section:\u003c\/strong\u003e 12-5\/8 x 4-3\/4 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade diameter:\u003c\/strong\u003e 20 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 7.5 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade speed:\u003c\/strong\u003e 2,800 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting cycles:\u003c\/strong\u003e up to 40 per minute\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStop travel:\u003c\/strong\u003e 4 to 157 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePositioning accuracy:\u003c\/strong\u003e plus or minus 0.012 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFootprint:\u003c\/strong\u003e 55 x 43 x 63 in plus roller tables\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet weight:\u003c\/strong\u003e 1,960 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSite services required\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectrical:\u003c\/strong\u003e 230 V 3-phase 60 Hz, 35 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressed air:\u003c\/strong\u003e 100 PSI minimum, 6 SCFM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDust extraction:\u003c\/strong\u003e one 6 in port, 825 CFM minimum\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSupplied with\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eOne 20 in crosscut blade fitted, one spare\u003c\/li\u003e\n\u003cli\u003eProgrammable stop and 10 ft infeed roller table\u003c\/li\u003e\n\u003cli\u003eInstallation, commissioning and operator training available through the manufacturer's authorized service network, quoted separately\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Woodie Machinery","offers":[{"title":"Default Title","offer_id":53399035937051,"sku":"WM-OPTICROSS-650","price":11750.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/4313\/5771\/files\/wm-opticross-650-upcut-saw-1.png?v=1786980729"},{"product_id":"wm-multirip-1300-rip-saw","title":"WM MultiRip 1300 Four-Blade Straight-Line Rip Saw","description":"\u003cp\u003eA four-blade multi-rip saw for converting rough sawn boards into dimensioned strips in one pass. Where a single-blade rip saw makes one cut per pass, this makes four, and the chain feed pulls the board through under top pressure rollers so the strips come out parallel rather than following any bow in the original board.\u003c\/p\u003e\u003cp\u003eBlade spacing is set on the arbor with spacer collars, so a shop running consistent strip widths for door stiles, drawer sides or edge-glued panel stock can set once and rip for a week.\u003c\/p\u003e\u003ch4\u003eKey features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFour-blade arbor with collar-set spacing from 3\/4 in upward\u003c\/li\u003e\n\u003cli\u003eHeavy chain feed with segmented top pressure rollers\u003c\/li\u003e\n\u003cli\u003eAnti-kickback fingers across the full infeed width\u003c\/li\u003e\n\u003cli\u003eVariable feed speed independent of blade speed\u003c\/li\u003e\n\u003cli\u003eCast iron table with replaceable wear plate\u003c\/li\u003e\n\u003cli\u003eQuick-release arbor for blade and spacer changes without dismantling\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum ripping width:\u003c\/strong\u003e 51 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum board thickness:\u003c\/strong\u003e 4 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum board length:\u003c\/strong\u003e 16 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum strip width:\u003c\/strong\u003e 3\/4 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of blades:\u003c\/strong\u003e 4 on a single arbor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade diameter:\u003c\/strong\u003e 14 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMain motor:\u003c\/strong\u003e 20 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeed motor:\u003c\/strong\u003e 3 HP, 20 to 98 ft\/min variable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFootprint:\u003c\/strong\u003e 83 x 67 x 57 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet weight:\u003c\/strong\u003e 4,080 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSite services required\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectrical:\u003c\/strong\u003e 230 V or 460 V 3-phase 60 Hz. 70 A at 230 V, 35 A at 460 V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDust extraction:\u003c\/strong\u003e one 8 in port, 1,410 CFM minimum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloor:\u003c\/strong\u003e Level concrete, machine must be bolted down\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSupplied with\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFour 14 in rip blades fitted, one spare set\u003c\/li\u003e\n\u003cli\u003eFull spacer collar set from 3\/4 to 8 in\u003c\/li\u003e\n\u003cli\u003eArbor spanner set and setting gauge\u003c\/li\u003e\n\u003cli\u003eInstallation, commissioning and operator training available through the manufacturer's authorized service network, quoted separately\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Woodie Machinery","offers":[{"title":"Default Title","offer_id":53399055466779,"sku":"WM-MULTIRIP-1300","price":27900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/4313\/5771\/files\/wm-multirip-1300-rip-saw-1.png?v=1786980730"},{"product_id":"wm-slidecut-3200-panel-saw","title":"WM SlideCut 3200 Sliding Table Panel Saw","description":"\u003cp\u003eAn industrial sliding table panel saw for straight-line sheet breakdown and solid timber sizing. The 10 ft 6 in sliding carriage runs on hardened ground rails with recirculating ball bearings, so the table stays parallel to the blade under a full sheet rather than deflecting as the load moves out over the end.\u003c\/p\u003e\u003cp\u003eThe scoring blade is the part that earns its keep on melamine and two-sided laminate. It cuts a shallow kerf ahead of the main blade so the face fibres are severed before the main blade lifts them, which is the difference between a clean edge and one that needs filling or hiding behind edge tape.\u003c\/p\u003e\u003ch4\u003eKey features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e10 ft 6 in sliding carriage on hardened ground rails\u003c\/li\u003e\n\u003cli\u003eIndependent scoring blade for chip-free melamine and laminate\u003c\/li\u003e\n\u003cli\u003eElectric rise, fall and tilt on the main blade with digital readout\u003c\/li\u003e\n\u003cli\u003eCast iron main table with ground surface\u003c\/li\u003e\n\u003cli\u003eTelescopic crosscut fence with two flip stops\u003c\/li\u003e\n\u003cli\u003eRip fence with fine adjustment and digital scale\u003c\/li\u003e\n\u003cli\u003eOverhead blade guard with integrated extraction\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSliding cutting length:\u003c\/strong\u003e 10 ft 6 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrosscut capacity:\u003c\/strong\u003e 126 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRip capacity:\u003c\/strong\u003e 51 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting height:\u003c\/strong\u003e 4-3\/8 in at 90 degrees, 2-3\/4 in at 45 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMain blade:\u003c\/strong\u003e 12 to 14 in diameter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScoring blade:\u003c\/strong\u003e 4-3\/4 in diameter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMain motor:\u003c\/strong\u003e 7.5 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScoring motor:\u003c\/strong\u003e 1.5 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade speed:\u003c\/strong\u003e 3,800 and 5,200 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFootprint:\u003c\/strong\u003e 150 x 122 x 35-1\/2 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet weight:\u003c\/strong\u003e 2,535 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSite services required\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectrical:\u003c\/strong\u003e 230 V 3-phase 60 Hz, 44 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDust extraction:\u003c\/strong\u003e one 5 in and one 3 in port, 825 CFM total\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFloor:\u003c\/strong\u003e Level concrete, machine must be levelled and bolted\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSupplied with\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eOne main blade and one scoring blade fitted\u003c\/li\u003e\n\u003cli\u003eTelescopic crosscut fence, two flip stops and rip fence\u003c\/li\u003e\n\u003cli\u003eOverhead blade guard and extraction hose\u003c\/li\u003e\n\u003cli\u003eInstallation, commissioning and operator training available through the manufacturer's authorized service network, quoted separately\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Woodie Machinery","offers":[{"title":"Default Title","offer_id":53402973110555,"sku":"WM-SLIDECUT-3200","price":17750.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/4313\/5771\/files\/wm-slidecut-3200-panel-saw-1.png?v=1786980729"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/4313\/5771\/collections\/cutting.png?v=1786913751","url":"https:\/\/woodiemachinery.com\/collections\/cutting.oembed","provider":"Woodie Machinery","version":"1.0","type":"link"}