WM RollerDeck RD3000 Powered Roller Conveyor
$5,900.00
A powered roller conveyor for moving panels and machined parts between workstations without carrying them. Modular 5 ft sections bolt together to any length, and the driven rollers run at a speed set to suit the operation, so parts arrive at the next station in order rather than in a pile.
Rollers are zinc-plated steel with sealed bearings, and the deck height matches standard machine outfeed heights so sections can be dropped straight in behind a saw or bander.
Key features
- Modular 5 ft sections, bolt together to any working length
- Chain-driven rollers with variable speed control
- Adjustable leg height from 29-1/2 to 37-1/2 in
- Zinc-plated 2-3/8 in rollers on sealed bearings
- Optional pneumatic stop and side guide kits
- Emergency stop at each control point
Technical specifications
- Supplied length: 10 ft as two 5 ft sections
- Roller width: 24 in between frames
- Roller diameter: 2-3/8 in, 4 in pitch
- Load capacity: 80 lb per foot distributed
- Conveying speed: 20 to 98 ft/min variable
- Working height: 29-1/2 to 37-1/2 in adjustable
- Motor: 1 HP per 10 ft drive section
- Net weight: 460 lb per 10 ft
Site services required
- Electrical: 230 V 3-phase 60 Hz, 17 A, or 240 V single phase on request
- Floor: Level concrete
Supplied with
- Two 5 ft sections, drive unit and speed controller
- Adjustable legs, leveling feet and section coupling hardware
- Self-install, approximately two hours